Sandstone has been used in some of the world’s most famous structures, including the White House, the Taj Mahal, the pyramids and the Angkor Vat, an ancient Cambodian temple.
A natural stone fireplace creates a stunning focal point in a room. It makes your room's enviornment very energetic and attractive . Also by choosing diffrent diffrent style of Fireplaces you can give diffrent diffrent feel to your room like morden , tradentional .
Stone cladding is a thin layer of real or simulated stone applied to a building or other structure made of a material other than stone. Stone cladding is sometimes applied toconcrete and steel buildings as part of their original architectural design.
Stone cladding often refers to lightweight simulated stone products with a concrete-type base. These stone cladding products are often fitted to lightweight substrates to reduce the material cost of construction; this would typically comprise
The Slate Veneer has thin stone layers and can be cut with standard saw equipment. Due to the thin stone layer and the fibre cover on the backside, the down time of the saw is reduced. Using panels with Slate Veneer on both sides, it is recommended to score them because the stone surface on the backside tends to slightly splinter. The routing process takes also only a short amount of time. For bigger production runs it is recommended to use diamond tools. Commonly used machine cutting speeds in the woodworking industry cannot be exceeded.
Dull tools, too high of a revolution or feed rate too slow will generate friction/heat and result in the plasticization of the polyester layer on the backside.
Base and balancing materials:
The base material must meet the specific application. All wood and lightweight materials are suitable. If the SLATE VENEER is only applied on one side of a carrier material, it is important to have a counter balance on the other side for stability.
different climate conditions have to be taken into consideration. This can be used only for wall and it can be applied for both interior and exteriors.